Home > Our Products > Vertical Boring Mills > Live Spindle Models


vertical boring mills

Vertical Borer Model TVB CNC/ATC Series

 


  • Vertical railhead with live spindle for milling operations (ISO 50 taper)

  • Driven by an AC brushless motor of 25HP; max.2,000RPM

  • The cross rail presents one disk-type tools magazine with either twelve or sixteen stations

  • Ram vertical travel: 47.2 inch. (optional: 59.1 or 70.9 inch.)

TECHNICAL CHARACTERISTICS TVB-LS
12/1400
TVB-LS
14/1650
TVB-LS
14/2150
TVB-LS
20/2150
TVB-LS
20/2650
TVB-LS
25/2650
TVB-LS
25/3250
TVB-LS
30/3250
TVB-LS
30/4250
TVB-LS
40/4250
TVB-LS
40/5250
table
diameter:
mm 1,200 1,450 1,450 2,000 2,000 2,500 2,500 3,000 3,000 4,000 4,000
inch  47.2 57.1 57.1 78.7 78.7 98.4 98.4 118.1 118.1 157.5 157.5
swing: mm 1,400 1,650 2,150 2,150 2,650 2,650 3,250 3,250 4,250 4,250 5,250
inch  55.1 65.0 84.6 84.6 104.3 104.3 128.0 128.0 167.3 167.3 206.7
max. height
over table
under rail:
mm 1,000 1,200 1,500 1,500 1,800 1,800 2,300 2,300 2,060 2,060 2,060
inch  39.4 47.2 59.1 59.1 70.9 70.9 90.6 90.6 81.1 81.1 81.1
max. weight
on table
kg 6,000 8,000 8,000 12,000 12,000 15,000 15,000 18,000 18,000 18,000 18,000
pounds 13,200 17,600 17,600 26,400 26,400 33,000 33,000 39,600 39,600 39,600 39,600
optional increased
max. weight
on table:
kg 8,000 11,000 11,000 15,000 15,000 25,000 25,000 30,000 30,000 30,000 30,000
pounds 17,600 24,200 24,200 33,000 33,000 55,000 55,000 66,000 66,000 66,000 66,000
optional increments
in height
under the head:
mm - +500 +500 +500 +500 +500 +500 +500
inch  +19.7 +19.7 +19.7 +19.7 +19.7 +19.7 +19.7
mm       +1,000 +1,000 +1,000 +1,000
inch       +39.4 +39.4 +39.4 +39.4
mm           +1,500 +1,500
inch           +59.1 +59.1
main drive motor power: kW 37 37 60
HP 50 50 80
"ZF" main drive gearbox: vertical shafts two speed ranges two speed ranges two speed ranges
table speed by main drive: RPM 5-300 3-250 2-170 2-150 1-120 1-100
cross rail vertical travel: mm 800 1,000 1,200 1,500 2,000 1,800
inch 31.5 39.4 47.2 59.1 78.7 70.9
cross rail drive motor: kW 4 4 7.5 7.5 7.5 7.5
HP 6 6 10 10 10 10
cross rail speed: mm/min 400 400 400 400 400 400
in/min 15.8 15.8 15.8 15.8 15.8 15.8
optional: cross rail index pitch: mm 100 100 100 100 100 100
inch 3.9 3.9 3.9 3.9 3.9 3.9
vertical railhead: ram type vertical railhead with live spindle for milling operations (ISO 50 taper),
driven by an AC brushless motor of 18.5kW. (25HP); max.2,000 RPM
live spindle: for milling the cross rail presents one disk-type tools magazine with either twelve or sixteen stations
"Z" axis vertical travel: mm. ram vertical travel: 1,200 mm. (optional: 1,500 mm. or even 1,800 mm.)
   inch ram vertical travel: 47.2 inch. (optional: 59.1 inch. or even 70.9 mm.)
working feed range: mm./min. 1 to 4,000 
in/min 0.04 to 157
fast displacements: mm./min. 8,000
in/min 314


Questions about our products? Call us TOLL FREE In Canada:
(800) 877-1116 In the US: (800) 878-2806


[Our Clients] [Our Products] [Price List] [Contact Us] [Fran?ais] [Home Page]
2001 - 2006 All Rights Reserved, Barer Engineering.