Home > Our Products > Vertical Boring Mills > Turret Type Models


vertical boring mills

Vertical Boring Mills Model TVL CNC/T 



  • Turret-type vertical railhead equipped with one square (or pentagonal) turret head,with manual (or powered) rotation

  • Vertical travel of turret of  31.5 inch. (Optionally: 39.4 inch.)

TECHNICAL CHARACTERISTICS TVL
12/1400
TVL
14/1650
TVL
14/2150
TVL
20/2150
TVL
20/2650
TVL
25/2650
TVL
25/3250
TVL
30/3250
TVL
30/4250
TVL
40/4250
TVL
40/5250
table
diameter:
mm 1,200 1,450 1,450 2,000 2,000 2,500 2,500 3,000 3,000 4,000 4,000
inch  47.2 57.1 57.1 78.7 78.7 98.4 98.4 118.1 118.1 157.5 157.5
swing: mm 1,400 1,650 2,150 2,150 2,650 2,650 3,250 3,250 4,250 4,250 5,250
inch  55.1 65.0 84.6 84.6 104.3 104.3 128.0 128.0 167.3 167.3 206.7
max. height
over table
under rail:
mm 1,000 1,200 1,500 1,500 1,800 1,800 2,300 2,300 2,060 2,060 2,060
inch  39.4 47.2 59.1 59.1 70.9 70.9 90.6 90.6 81.1 81.1 81.1
max. weight
on table
kg 6,000 8,000 8,000 12,000 12,000 15,000 15,000 18,000 18,000 18,000 18,000
pounds 13,200 17,600 17,600 26,400 26,400 33,000 33,000 39,600 39,600 39,600 39,600
optional increased
max. weight
on table:
kg 8,000 11,000 11,000 15,000 15,000 25,000 25,000 30,000 30,000 30,000 30,000
pounds 17,600 24,200 24,200 33,000 33,000 55,000 55,000 66,000 66,000 66,000 66,000
optional increments
in height
under the head:
mm - +500 +500 +500 +500 +500 +500 +500
inch  +19.7 +19.7 +19.7 +19.7 +19.7 +19.7 +19.7
mm       +1,000 +1,000 +1,000 +1,000
inch       +39.4 +39.4 +39.4 +39.4
mm           +1,500 +1,500
inch           +59.1 +59.1
main drive motor power: kW 37 37 60
HP 50 50 80
"ZF" main drive gearbox: vertical shafts two speed ranges two speed ranges two speed ranges
table speed by main drive: RPM 5-300 3-250 2-170 2-150 1-120 1-100
cross rail vertical travel: mm 800 1,000 1,200 1,500 2,000 1,800
inch 31.5 39.4 47.2 59.1 78.7 70.9
cross rail drive motor: kW 4 4 7.5 7.5 7.5 7.5
HP 6 6 10 10 10 10
cross rail speed: mm/min 400 400 400 400 400 400
in/min 15.8 15.8 15.8 15.8 15.8 15.8
optional: cross rail index pitch: mm 100 100 100 100 100 100
inch 3.9 3.9 3.9 3.9 3.9 3.9
vertical railhead: turret type turret-type vertical railhead equipped with one square (or pentagonal) turret head, with manual (or powered) rotation
"Z" axis vertical travel: mm. vertical travel of turret of 800mm.  (optionally: 1,000mm.)
 inch vertical travel of turret of 31.5 (optionally: 39.4)
working feed range: mm./min. 1 to 4,000 
in/min 0.04 to 157
fast displacements: mm./min. 8,000
in/min 314


Questions about our products? Call us TOLL FREE
In the US: (800) 878-2806


[Our Clients] [Our Products] [Price List] [Contact Us][Home Page]
© 2001 - 2006 All Rights Reserved, Barer Engineering.